View Region Information for a PLM Record
- Last UpdatedApr 24, 2025
- 1 minute read
The Pipeline Monitoring (PLM) Region Information describes the PLM region information appearing on the PLM Control window. The PLM region information is highlighted in red.
The following table detail the PLM region information.
|
Field |
Description |
|---|---|
|
Name |
Record name. |
|
Description |
Record description. |
|
Status |
Standard RealTime database (RTDB) record state information as set by the flags. |
|
Volume Units |
Units of measurement for the record. This provides information only and has no processing effect. |
|
Calculating |
If yes, balance terms are being calculated. |
|
Alarm Suppressed |
If yes, alarming is blocked by the standard RealTime Alarm Suppression application. Note: The Pipeline Monitor (PLM) application supports scenarios where both Alarm Suppression and PLM Voting are configured. However, Alarm Suppression and Dynamic Alarming are mutually exclusive—if Dynamic Alarming triggers are specified, Alarm Suppression will be automatically disabled. |
|
Alarm Limits Expanded |
If yes, the Dynamic Alarm Limits utility has altered one or more of the configured deviation limits. |
|
Inhibit |
Inhibit state. Options are the following:
|