Understand the Product Transfer Checking Record Inhibits tab
- Last UpdatedApr 24, 2025
- 2 minute read
The Inhibits tab of the Product Transfer Checking (flowxfer) Row Edit dialog allows you to enable or disable different logging and alarming options generated by the continuous monitor.
The continuous monitor checks for product violations that occur in the flowxfer process. For example, if a valve is opened in the field that a Controller did not command, and this in turn triggered a violation, then the system would generate an alarm.
These alarms and logging options will not affect Rules Validation Engine (RVE) rule detection or overrides, as this configuration exists on each status or multistate control point.
The following table describes the fields on the Inhibits tab of the Product Transfer Checking (flowxfer) Row Edit dialog.
|
Item |
Description |
|---|---|
|
Inhibit |
Select this checkbox to inhibit the monitoring of the flowxfer record altogether. Flowxfer can be inhibited by both you and the Controller, although the Controller cannot override an Administrator's inhibit setting. |
|
Inhibit Violation Alarms |
Prevent the generation of product violation alarms generated by the continuous monitor for this rule. |
|
Inhibit Return-to-Normal Alarms |
Prevent the generation of Return-to-Normal alarms when a rule that was in violation is resolved. |
|
Inhibit Violation Logging |
Prevent the generation of an Historical event when a product violation is detected. |
|
Inhibit Return-to-Normal Logging |
Prevent the generation of an Historical event when a rule that was in violation is resolved. |
|
Inhibit Command Alarms |
Select this checkbox to inhibit the alarm that is generated when the Product Injection Verification and Control feature sends an ON or OFF command to the configured status or multistate point. |