Understand the alarm/event messages to the message identifier for Action Sequences
- Last UpdatedApr 24, 2025
- 4 minute read
The following table provides details for configuring the Action Sequence alarm/event messages.
Note: The messages noted in the table are designated as either alarms that generate identical events or simple events. In all cases, you can customize the message text and, where applicable, adjust the alarm severity. To update an alarm/event message, refer to the msgInfo table row for alarm/event message identifier of interest. For more information on configuration using the msgInfo table, refer to Volume 1 of the RealTime Administrator documentation.
|
Alarm/Event |
Alarm/Event Message Configuration |
Alarm Severity Configuration |
Type |
|---|---|---|---|
|
Action sequence <RECORD NAME> armed <USER AND SYSTEM NAME>. |
ACTIONSEQ_ARMED |
Base Message |
Alarm & Event |
|
Action sequence <RECORD NAME> does not have two-stage activation enabled. Ignoring Arm command <USER AND SYSTEM NAME>. |
ACTIONSEQ_TWO_STAGE_NOT_ENABLED |
N/A |
Event |
|
Action sequence <RECORD NAME> is <RECORD STATE>. Ignoring <COMMAND> command <USER AND SYSTEM NAME>. |
ACTIONSEQ_IGNORE_COMMAND |
N/A |
Event |
|
Action sequence <RECORD NAME> is already <RECORD STATE>. Ignoring <COMMAND> command <USER AND SYSTEM NAME>. |
ACTIONSEQ_IGNORE_COMMAND_ALREADY |
N/A |
Event |
|
Action sequence <RECORD NAME> started at step <STEP NAME> <USER AND SYSTEM NAME>. |
ACTIONSEQ_STARTED_AT_STEP |
N/A |
Event |
|
Action sequence <RECORD NAME> is already stopped. Ignoring Stop command <USER AND SYSTEM NAME>. |
ACTIONSEQ_ALREADY_STOPPED |
N/A |
Event |
|
Unable to start the action sequence at the specified step <STEP NAME> <USER AND SYSTEM NAME>. Step slot must be a valid point number greater than zero. |
ACTIONSEQ_CANT_START_STEPSLOT_INVALID |
N/A |
Event |
|
Action sequence <RECORD NAME> disarmed <USER AND SYSTEM NAME>. |
ACTIONSEQ_DISARMED_COMMAND |
Base Message |
Alarm & Event |
|
Action sequence <RECORD NAME> is not Armed. Ignoring Disarm command <USER AND SYSTEM NAME>. |
ACTIONSEQ_IGNORE_DISARM_COMMAND |
N/A |
Event |
|
Action sequence <RECORD NAME> pausing <USER AND SYSTEM NAME>. |
ACTIONSEQ_PAUSE_COMMAND |
N/A |
Event |
|
Action sequence <RECORD NAME> is not Executing. Ignoring Pause command <USER AND SYSTEM NAME>. |
ACTIONSEQ_IGNORE_PAUSE_COMMAND |
N/A |
Event |
|
Action sequence <RECORD NAME> resumed <USER AND SYSTEM NAME>. |
ACTIONSEQ_RESUME_COMMAND |
N/A |
Event |
|
Failed to resume action sequence <RECORD NAME> <USER AND SYSTEM NAME>. Could not find a valid step to resume. |
ACTIONSEQ_RESUME_FAILED |
Base Message |
Alarm & Event |
|
Action sequence <RECORD NAME> resumed at step <RESUMED STEP NAME> <USER AND SYSTEM NAME>. |
ACTIONSEQ_RESUMED_AT_STEP |
N/A |
Event |
|
Action sequence <RECORD NAME> is already running. Ignoring Resume command <USER AND SYSTEM NAME>. |
ACTIONSEQ_ALREADY_RUNNING_IGNORE_RESUME |
N/A |
Event |
|
Action sequence <RECORD NAME> is not Paused. Ignoring Resume command <USER AND SYSTEM NAME>. |
ACTIONSEQ_NOT_PAUSED_IGNORE_RESUME |
N/A |
Event |
|
Action sequence <RECORD NAME> is not armed, but received a Start command <USER AND SYSTEM NAME>. Bypassing arming stage and allowing execution to continue. |
ACTIONSEQ_NOTARMED_START_REQUESTED |
N/A |
Event |
|
Action sequence <RECORD NAME> is already Executing. Ignoring Start command <USER AND SYSTEM NAME>. |
ACTIONSEQ_ALREADY_EXECUTING |
N/A |
Event |
|
Failed to load action sequence <RECORD NAME>. Ignoring Start command <USER AND SYSTEM NAME>. |
ACTIONSEQ_FAILED_TO_LOAD |
Base Message |
Alarm & Event |
|
Failed to start action sequence <RECORD NAME> <USER AND SYSTEM NAME>. Could not find the specified step at which to start. |
ACTIONSEQ_FAILED_TO_START |
Base Message |
Alarm & Event |
|
Action sequence <RECORD NAME> started <USER AND SYSTEM NAME>. |
ACTIONSEQ_STARTED |
N/A |
Event |
|
Unable to start the action sequence at the specified step <STARTING STEP NAME> <USER AND SYSTEM NAME>. The target sequence step <STEP NAME> does not belong to the action sequence record. |
ACTIONSEQ_CANT_START_TARGET_SEQ_STEP_INVALID |
N/A |
Event |
|
Unable to start the action sequence at the specified step <STARTING STEP NAME> <USER AND SYSTEM NAME>. Could not find a sequence step record with that slot number. |
ACTIONSEQ_CANT_START_STEP_RECORD_NOT_FOUND |
Base Message |
Alarm & Event |
|
Stopping action sequence <RECORD NAME> <USER AND SYSTEM NAME>. |
ACTIONSEQ_STOP |
N/A |
Event |
|
Action sequence completed successfully. |
ACTIONSEQ_COMPLETED_SUCCESSFUL |
Base Message |
Alarm & Event |
|
Action sequence completed, however one or more steps failed. |
ACTIONSEQ_COMPLETED_FAILED |
Base Message |
Alarm & Event |
|
Action sequence failed to pause <USER AND SYSTEM NAME> at step <STEP NAME>. The executing step failed. Action sequence <RECORD NAME> is now stopped. |
ACTIONSEQ_FAILED_TO_PAUSE |
Base Message |
Alarm & Event |
|
Action sequence failed on step <STEP NAME>: <ERROR DESCRIPTION>. |
ACTIONSEQ_FAILED_STEP |
Base Message |
Alarm & Event |
|
Step <STEP NAME> failed: <ERROR DESCRIPTION>. Retry attempt <EXECUTION ATTEMPT> of <RETRY COUNT>. |
ACTIONSEQ_STEP_FAILED_RETRY |
N/A |
Event |
|
Sequence failed on step <STEP NAME>: ActionSequence <RECORD NAME> failed unexpectedly. |
ACTIONSEQ_FAILED_STEP_UNEXPECTEDLY |
Base Message |
Alarm & Event |
|
Step <STEP NAME> failed. Proceeding to failure step <STEP NAME>. |
ACTIONSEQ_FAILED_STEP_BRANCH |
Base Message |
Alarm & Event |
|
Step <STEP NAME> succeeded. |
ACTIONSEQ_SUCCESSFUL_STEP |
N/A |
Event |
|
Action sequence failed on step <STEP NAME>: Set point timed out. |
ACTIONSEQ_FAILED_STEP_SETPOINT_TIMED_OUT |
Base Message |
Alarm & Event |
|
Action sequence stopped <USER AND SYSTEM NAME> at step <STEP NAME>. |
ACTIONSEQ_STOPPED |
N/A |
Event |
|
Action sequence paused <USER AND SYSTEM NAME> at step <STEP NAME>. |
ACTIONSEQ_PAUSED |
N/A |
Event |
|
Sequence execution interrupted due to a fail-over or mode-switch. |
ACTIONSEQ_INTERRUPTED |
Base Message |
Alarm & Event |
|
Sequence execution interrupted at step <STEP NAME> due to a fail-over or mode-switch. |
ACTIONSEQ_INTERRUPTED_WITH_STEP |
Base Message |
Alarm & Event |
|
Step <STEP NAME> failed.No failure step exists for step. Terminating action sequence. |
ACTIONSEQ_FAILED_NO_FAILURE_BRANCH |
N/A |
Event |
|
Decision Step <STEP NAME> with a timeout of <TIMEOUT VALUE> second(s) has evaluated to false. Waiting for timeout to expire after an additional <TIME TO TIMEOUT VALUE> second(s) or a target result of true before proceeding. |
ACTIONSEQ_DECSTEP_EVAL_FALSE_CONTINUE |
N/A |
Event |
|
Decision Step <STEP NAME> has evaluated to true. If a step is linked to this result, it will be executed next. |
ACTIONSEQ_DECSTEP_EVAL_TRUE |
N/A |
Event |
|
Decision Step <STEP NAME> with a timeout of <TIMEOUT VALUE> second(s) has evaluated to false, and timeout has expired. If a step is linked to this result, it will be executed next. |
ACTIONSEQ_DECSTEP_EVAL_FALSE_AFTER_WAIT |
N/A |
Event |
|
Decision Step <STEP NAME> with a timeout of 0 second(s) has evaluated to false. Waiting indefinitely for the Decision Step to evaluate to true before proceeding. |
ACTIONSEQ_DECSTEP_EVAL_FALSE_INDEFINITE |
N/A |
Event |
|
Decision Step <STEP NAME> has evaluated to false. If a step is linked to this result, it will be executed next. |
ACTIONSEQ_DECSTEP_EVAL_FALSE |
N/A |
Event |
|
Decision Step <STEP NAME> with a timeout of <TIMEOUT VALUE> second(s) has evaluated to true. If a step is linked to this result, it will be executed next. |
ACTIONSEQ_DECSTEP_EVAL_TRUE_AFTER_WAIT |
N/A |
Event |
|
Executing legacy action sequence <NAME>. This action sequence should be upgraded. Please contact your administrator. |
ACTIONSEQ_LEGACY |
N/A |
Event |