Select the Pump record State Configuration

The State Configuration dialog allows a user to associate each message set entry on a selected status or multistate point with a pump state. This pump state will be used by all of the AVEVA Pipeline Operations for Liquids applications that rely on pump information. A row will be automatically generated for each entry of the message set of the point configured within the Path field.

Note: The message set of the status or multistate point is configured on the Main tab of the Status or Multistate Row Edit in the Base Message field. From there, you can select a number of possible message sets as long as the message set contains no more than 32 values. The pump record can have a different message set than the status or multistate. For more information on the pump message set, see Working with the Pump Message Sets.

To select the Pump record State Configuration

1. Open the Pump Row Edit dialog.

2. Select the Main tab.

3. Select State Configuration.

   The State Configuration dialog appears.

   

4. Select the State Type for each message set.

   There are eight states:

   • Unused — This indicates that the state is unused. This is indicated by an error state.

   • Error — This indicates that the pump is in an error state.

   • Running — This indicates that the pump is running.

   • Stopped — This indicates that the pump has stopped.

   • Transit — This indicates that the pump is in transit. Line Blockage will use the last known good state.

   • Idle — This indicates that the pump is idle.

   • Starting — This indicates that the pump is starting.

   • Stopping — This indicates that the pump is stopping.

5. Select Accept.