Use the DRA Line Control dialog
- Last UpdatedApr 24, 2025
- 1 minute read
The Drag Reducing Agent (DRA) Line Control window is used to make changes to the DRALine record.
You can perform the following:
-
Change the current Flow Rate Range selection.
-
Set (or reset) the line to Automatic Mode.
The following table details the items on the DRA Line Control dialog.
|
Item |
Description |
|---|---|
|
Name |
The name of the DRALine record. |
|
Description |
The description of the DRALine record. |
|
Flow Rate Range |
Displays the Flow Rates available for the Flow Rate Range category that has been configured for this DRALine record. The current assigned Flow Rate Range is highlighted as the dialog appears. If there is no currently assigned Flow Rate Range, then —none— is highlighted. You can change the Flow Rate Range by selecting a new one in this field. |
|
Submit |
Saves the changes to the Flow Rate Range. |
|
Automatic Mode |
Indicates if the DRALine record is in Automatic Mode (where DRA injectors on the line may automatically receive setpoint information via DRA Setpoint Lookup method). |