Access the Interface Detect Summary window
- Last UpdatedApr 24, 2025
- 2 minute read
The Interface Detect Summary window lists all batch interface detection points within the pipeline.
To access the Interface Detect Summary Window
-
Click Interface Detect on the Batch Tracking Control menu.
The Interface Detect Summary window appears.
The following table details the items on the Interface Detect Summary window.
|
Items |
Description |
Detect Table Field |
|---|---|---|
|
Name |
Name. |
name |
|
DET |
If this field is set to Yes, the interface has been detected. |
fnd_interface |
|
Val Type |
Type of measurement.
|
anatype |
|
Inh |
If yes, detect record is inhibited from processing. |
inh |
|
Cur Batch |
ID of batch currently flowing past detector. |
curr_batch |
|
Cur Batch Val |
Property value, either from the current batch record (if density type) or from the product of the batch (if sonic velocity type). |
curr_bat_val[0] |
|
Cur Unit |
Density units for the current batch:
|
curr_dens_type |
|
Next Batch |
ID of next batch upstream of the current. |
next_batch |
|
Next Batch Val |
Property value, either from the next batch record (if density type) or from the product of the next batch (if sonic velocity type). |
next_bat_val[0] |
|
Next Unit |
Density units for the next batch:
|
next_dens_type |
|
Cut Type |
Type of cut to apply to the end of the batch. That is, where to locate the interface in the transmix zone between the current and next batch. The cut type can be one of the following options:
|
cut_type |
|
Threshold |
Property value that the batch cut is applied to. |
thresh[0] |
|
Telemetry |
Current value at property value analog. |
dtel_reading[0] |
|
Alarm State |
Detect record alarm state. The Alarm State can be one of the following options:
|
alm_state |