Configure the Status tab on the Pipe Segment record
- Last UpdatedApr 24, 2025
- 2 minute read
This table defines the fields on the Status tab and their corresponding Batch Tracking Compiler attributes.
|
BTC Attributes |
Status tab, pipe_segment Row Edit |
Description |
|---|---|---|
|
PIPE |
Pipe Segment |
The pipe name. |
|
GROUP |
Group |
The group name. For more information about groups, see Configure the Batch Estimated Time of Arrival (ETA) tab of the Node record. |
|
Dataset |
Dataset defined by the pipeline record. This typically is not defined by a BTC attribute. |
|
|
SECT |
Section |
A logical grouping of pipe segments. |
|
UNITPROF |
Input Unit Profile |
The unit profile that the segment uses for display units and conversions. |
|
PRIDISPLAY |
Priority Display |
The easy eXtended Operator Station (ezXOS) display name that can be accessed from the Alarm Summary when this point generates an alarm. |
|
PIPEFL |
Flow Status path |
The name of the status point that indicates whether or not fluid is flowing through the pipe segment. Typically, this is a valve on the pipe segment. Select (...) to open the Output Point Path Selector dialog. |
|
PIPERV |
Reverse Status path |
The name of the status point that indicates whether or not the pipe segment is flowing in its reverse direction. A derived point is used if there is no appropriate telemetered point. Select (...) to open the Output Point Path Selector dialog. |
|
FILCON |
Linepack Filter Constant |
The linepack filter constant, K. This is used to smooth the calculated linepack between cycles via the following equation:
where:
|
โ is the filtered linepack value.
โ is the calculated linepack value.
โ is the previous linepack value.
โ is the