Configure the Commands tab of the FcConfigTelemetered Row Edit dialog
- Last UpdatedApr 24, 2025
- 2 minute read
This tab is used to configure the commands that are sent to the Flow Computer from the AVEVA Enterprise SCADA system. When the Controller elects to send a Batch Start, Batch Split or Batch Stop action, the system will check the configuration of these points and issue the Command Criteria state to the appropriate point, which is determined by the Command Path.
Items on the fcConfig Telemetered Row Edit: Commands Tab
|
Item |
Description |
|---|---|
|
Batch Start Command Path |
Click (...) to select the pathway to a status or multistate point that will provide an indication that the batch should start. After selecting (...), the Path Selector appears. Select a table and record. Until a table and record are selected, you will not be able to select Accept. For more information about how to select a pathway, refer to Volume 1 of the RealTime Administrator documentation. |
|
Batch Start Command Criteria |
Click (...) to open the Status or Multistate Message Selector. This provides the message to send to indicate that a batch start should take place. |
|
Batch Split Command Path |
Click (...) to select the pathway to a status or multistate point that will provide an indication that the batch should split. After selecting (...), the Path Selector appears. Select a table and record. Until a table and record are selected, you will not be able to select Accept. For more information about how to select a pathway, refer to Volume 1 of the RealTime Administrator documentation. |
|
Batch Split Command Criteria |
Click (...) to open the Status or Multistate Message Selector. This provides the message to send indicating that the batch split should take place. |
|
Batch Stop Command Path |
Click (...) to select the pathway to a status or multistate point that will provide an indication that the batch should stop. After selecting (...), the Path Selector appears. Select a table and record. Until a table and record are selected, you will not be able to select Accept. For more information about how to select a pathway, refer to Volume 1 of the RealTime Administrator documentation. |
|
Batch Stop Command Criteria |
Click (...) to open the Status or Multistate Message Selector. This provides the message to send indicating that the batch stop should take place. |