View more details about the device sources
- Last UpdatedApr 24, 2025
- 2 minute read
To view more details about the device sources
-
Select the row header of the device source associated with the Batch Transfer that you would like to view the Batch Transfer Source Summary window.
The Batch Transfer Source window appears.
The following table lists the fields on the Batch Transfer Source dialog:
|
Group Type |
Fields |
Description |
|---|---|---|
|
Batch Transfer Source |
||
|
Source Name |
The name of this source record. |
|
|
Device Path |
Provides the pathway to the device where the record gathers its source information. |
|
|
Type |
The type of source in use by the batchXferSource record. Currently there are Rate, Tank, Virtual Flow Computer, and Flow Computer sources, though a plugin can be created for any source that provides a volume reading. |
|
|
Auto Inh Allowed |
If selected, Auto Inhibit is enabled for this source, meaning that if an Auto Inhibit point is configured, when that point changes to a state configured in Advanced Database Editor (ADE), this source (and all its devices) will be inhibited, and vice versa. |
|
|
Auto Inhibit Point |
A path to either a status or multistate point that controls Auto Inhibit. For it to be used, Auto Inh Allowed must read Yes. |
|
|
Auto Inhibited |
Will read Yes if the point is currently being inhibited by a configured Auto Inhibit point. |
|
|
Inhibit Record |
If selected, the source will immediately be inhibited, along with all of the associated devices. |
|
|
Batch Transfer Source Calculation Records |
||
|
Device ID |
The configured device identifier. Typically, this is the name of the accumulator connected to the source the device is associated with. |
|
|
GSV |
The Gross Standard Volume (GSV) the device has recorded. |
|
|
GSflow |
The current flow rate on the device corrected to standard temperature and pressure. |
|
|
Mass |
The current mass on the device. |