AVEVA™ Unified Engineering

Understand the Hole Bevel properties

Save PDF

Save PDF

The Properties grid displays the attributes of the selected hole.

General

Displays information that identifies the hole and its manufacturing method.

Designation

Modify the standard hole designation that defines the hole shape and dimensions.

Type

Specifies the manufacturing type of the hole.

When you select Type, a dropdown is available with the following options:

Marked	The hole is marked for manufacturing.
Burnt	The hole is burnt during manufacturing.
Drilled	The hole is drilled during manufacturing.

Angle

Enter the hole angle (degrees).

Position

Modify the hole position relative to the part's origin (mm):

X	Enter the distance from the origin in the X direction.
Y	Enter the distance from the origin in the Y direction.

Bevel

Displays information about the bevel applied to the hole boundary.

Bevel Code

Modify the standard bevel code that defines the bevel shape used during manufacturing.

When you select the Bevel Code line, the ellipsis button appears. Select it to open the Bevel Code Selection window.

Design

Displays additional information associated with the selected bevel definition.

Variant

Displays the bevel variant. Variants are used to distinguish between alternative versions of a bevel definition.

E-Measure

Displays the effective measure associated with the bevel.

Definition

Displays the primary parameters that define the bevel geometry.

Basic Type	Displays basic bevel category.
Type	Displays the bevel type.
Nose	Displays the nose dimension of the bevel.
Gap	Displays the root gap associated with the bevel preparation.
Varying	Displays if the bevel dimensions vary along the edge.
Varying	True shows that the bevel dimensions vary. False shows that the bevel dimensions remain constant.

This Side

Displays the bevel information applied to one side of the hole.

Angle	Displays the the bevel angle on this side of the hole.
Chamfer Width	Displays the width of the chamfer.
Chamfer Height	Displays the height of the chamfer.
Second Angle	Displays an additional bevel angle when a compound bevel is used.
Second Chamfer Width	Displays the width of the secondary chamfer.
Depth	Displays the depth of the bevel preparation.
Name	Displays the profile assigned to this side of the hole bevel.

Other Side

Displays bevel information applied to the opposite side of the hole.

Misc

Displays additional information about the bevel assignment.

Note: The Properties grid for a notch bevel can be interpreted in the same way as the Properties grid for a hole bevel.