Taps Configuration window
- Last UpdatedMay 21, 2026
- 3 minute read
Defines the Taps configuration which can be used for detailing of panels. By default, there is no taps configuration prepared.
Add
|
|
Enables the Taps definition section so you can add a new tap to a tap-standards catalog.
When you create a new tap, all fields are empty by default. |
|
|
Type |
Defines the numeric code used for tap creation. Enter a number containing between one and five digits. |
|
|
Description |
Provides a description to help identify the Type. |
|
|
Width |
Specifies the width displayed in the Guide image. Enter the value in millimetres (mm). |
|
|
Height |
Specifies the height displayed in the Guide image. Enter the value in millimetres (mm). |
|
|
Radius |
Specifies the radius displayed in the Guide image. Enter the value in millimetres (mm). |
|
|
After you add a tap definition, the configuration field displays the new entry and the other action icons are enabled.
|
||
Edit
|
|
Enables the Taps definition section so you can edit a tap selected in the Taps Configuration list.
|
|
|
Type |
Displays the type number of the selected tap. The field is greyed by default. You can not edit the number. |
|
Copy
|
|
Enables the Taps definition section so you can edit the copied tap selected in the Taps Configuration list.
|
|
|
Type |
Is empty by default in a copied definition. Enter a number to define a new tap type. |
|
Delete
|
|
Displays the Confirm window to remove a selected bevel in the list.
|
|
|
Yes |
Removes the selected tap. |
|
|
No |
Cancels the deletion of the selected tap. |
|
Taps definition
Displays the taps definition.
Dependent on the selected operation (Add, Edit, Copied), you can enter or modify parameters.
Store
Note: The Store button is enabled, if you select one of the operational icons: Add, Edit, Copied.
|
|
Stores modifed parameters within the tap catalog. The data is available to use in Production Design. For more information, refer to Edge Creation window in Production Design. |
