Bevel Standards window
- Last UpdatedMay 20, 2026
- 4 minute read
Defines the Bevel Sandards used for detailing panels in Production Design.
Filter
Filters the available bevels in the list.
Use the entry field to filter the list by entering a bevel code or bevel number.
Use the dropdown list to filter bevel codes by bevel type. Available options include: All Bevels, I-Bevel, V-Bevel, Y-Bevel, K-Bevel and X-Bevel.
Butt
|
|
Select the Butt check box to display all bevels connected in the same direction. Clear the checkbox to hide the butt bevels. |
Fillet
|
|
Select the Fillet check box to display all bevels connected in different directions. Clear the checkbox to hide the fillet bevels. |
Bevel Types preview
Displays all predefined bevel types by default. You can refine the list using the Filter and the Butt or Fillet checkboxes.
Select a bevel type to display the corresponding Bevel data on the left side of the Bevel Standards window. For each bevel type you can define or modify the required parameters using the operational icons (Add, Edit, Copy).
Diagram
Displays the diagram of a bevel selected in the list.
Add
|
|
Enables the Parameters area so you can add a new bevel to the bevel standards catalog.
For a new bevel, all entry fields and tables are empty by default. |
Edit
|
|
Enables the Parameters area so you can edit a bevel selected in the list.
|
|
|
Bevel Code |
Displays the code number of the selected bevel. The field is greyed by default. You cannot edit the number. |
|
Copy
|
|
Enables the Parameters area so you can edit the copied bevel selected in the list.
|
|
|
Bevel Code |
Is zero by default in a copied list. Enter a number to define a new code. |
|
Delete
|
|
Displays the Confirm window to remove a selected bevel in the list.
|
|
|
Yes |
Removes the selected bevel. |
|
|
No |
Cancels the deletion of the selected bevel. |
|
Parameters
Displays the bevel parameters.
Dependent on the selected operation (Add, Edit, Copied), you can modify parameters.
Parameters grids
Displays the parameters defined for noses and H-values.
Right-click in the grid to display the context menu.
|
|
Add |
Inserts a new line in the grid and enables the Min. Thickness, Max Thickness and Value/Formula entry fields below the grid. |
|
|
Remove |
Removes the line and its values from the grid. |
To edit values, select a line in the grid. The corresponding values appear in the entry fields below, where you can modify them.
The parameters displayed in the grid depend on the selected bevel type. Thickness intervals in the Min Thk column must start at 0. You cannot define the thickness intervals with a gaps. For example, if the maximum thickness in the Max Thk is 10 mm, the next interval must start at 10 mm.
Store
Note: The Store button becomes available if you select one of the operational icons: Add, Edit, Copied.
|
|
Stores modifed parameters within the bevel catalog. The data is available to use in Production Design. For more information, refer to Edge Creation window in Production Design. |
