Configure the Realtime_Nom2XML​.json file

Note: For information on overriding default configuration settings, see Modify configuration settings.

1. If the Realtime_Nom2XML_override.json file exists under %DNADataRoot%\Realtime\config\Settings, open it and proceed to step 3.

   Otherwise, proceed to step 2.

2. Copy the %DNAInstallRoot%\Realtime\config\Settings\Realtime_Nom2XML.json file to %DNADataRoot%\Realtime\config\Settings, rename it Realtime_Nom2XML_override.json, and open it.

3. In the file, locate the configuration section for each linked pair of ports that you need to define:

   {

   "RealTime": {

   "Nom2XML": {

   "ServerName": "localhost",

   "PortNumber": 5000,

   "GasContractPrefix": "m",

   "FileFormatType": 0,

   "DebugLevel": 3

   }

   }

   }

4. Define the following items for the Nom2XML process:

   • ServerName: The hostname or IP Address where the SocketRelayServerService service runs. The default is "localhost".

   • PortNumber: The port number to use. The default is 5000.

   • GasContractPrefix: A prefix added to the point name. The resulting string must match the AVEVA Enterprise SCADA gas contract name. The default prefix is "m".

   • FileFormatType: The file format to use. The default is 0.

     0 is STANDARD_FORMAT:

     <Point Name>,<Point Code>,<Receipt Or Delivery>,<Scheduled Quantity (V)>,<Scheduled Quantity (E)>,<Cycle>,<Gas Day>

     1:

     <Point Code>,<Receipt Or Delivery>,<Scheduled Quantity (V)>,<Scheduled Quantity (E)>,<Cycle>,<Gas Day>

   • DebugLevel: Set the debug level to a value ranging from 3 to 6.

     Where:

     • 3 = DebugLog (default)

     • 4 = Warning

     • 5 = Info

     • 6 = Verbose