View hourly, daily, or monthly remote communication statistics

Follow this procedure to open the Historical Remote Statistics window.

To view hourly, daily, or monthly remote communication statistics

1. From the Navigation Menu, open the Model Select dialog box (refer to the AVEVA Enterprise SCADA HMI Controller documentation).

2. On the Model Select dialog box, select DAILY_MONTHLY_REMOTE.

   Note: The above procedure is the default method for accessing the window. Typically, the appropriate personnel would either configure such windows to appear at Login or design a more practical access method.

   The Historical Remote Statistics window opens.

   

3. Select one of the following:

   • Hourly Remote Statistics (default)

   • Daily Remote Statistics

   • Monthly Remote Statistics

   Note: Steps 4 to 8 below are optional. If you select Search without configuring any filters, the Historical Remote Statistics window updates with all statistics for all remotes within the selected hourly, daily, or monthly period.

4. In the Remote field, enter or select the name of a connection's remote.

5. In the Connection field, enter or select the name of a connection used to communicate with remotes.

6. In the Group field, enter or select the name of a group encompassing certain remotes and connections.

7. In the Area field, enter or select the name of an area encompassing certain groups.

8. Select and configure the Start Time and End Time filters to retrieve data within a certain time range.

9. Select Search.

   The Historical Remote Statistics window updates with data based on the filters and/or selected granularity.

   Historical Remote Statistics window - Hourly

   

   Historical Remote Statistics window - Daily

   

   Historical Remote Statistics window - Monthly

   

   Item	Description
   Time	The date on, and time at, which the system collected the data. Each row represents all activity within an hour, day, or month, depending on Step 3 above. For example, for hourly statistics, if the system polls the Remote Terminal Unit (RTU) every second, the row covers the statistics of 60 polls; if every two minutes, there may be no activity for that minute.
   Remote	The remote associated with the row of statistics.
   Connection	The connection associated with the row of statistics.
   Success	The number of successful polls.
   Failed	The total number of all categorical failures.
   Total	The total number of polls (Success + Failed).
   %Thruput	The percentage of good polls (Success / Total x100).
   No Reply	The number of polls that went unanswered.
   Security	The numbers of times where the CRC or security byte(s) in the response was incorrect.
   Long Msg	The number of responses where there were more bytes than expected.
   Short Msg	The number of responses where there were less bytes than expected.
   Wrong RTU	The number of responses from an unexpected source or RTU.
   Offline	The number of times the remote went offline.
   SBO Relay	The number of Select Before Operate (SBO) relay command failures.
   DB Error	The number of attempted polls with a bad or incorrect configuration on the host.
   Offscan	The number of attempted polls with the remote offscan (either manual or scheduled commands).
   Illegal Msg	The number of incorrect or illegal responses to a query.
   SBO Select	The number of SBO select command failures.
   Line fail	The number of attempted polls while the connection was in a failed state.