Systems Object Properties - PubSub
- Last UpdatedJul 05, 2024
- 2 minute read
The PubSub tab allows you to configure the PubSub properties of a Systems Object, such as the Port Number of the host and client computers.
For information about the fields located on the Systems Object Properties - PubSub dialog box, refer to the table below.
|
Fields |
Description |
|---|---|
|
Multicast IP Address |
The common IP address that the engines use for communication on a single system. This is system specific. |
|
Port Number |
This field contains the physical port number of the modem for a Xyplex terminal server: port number = 2000 + (100 * port). Therefore, port 4 on the terminal server has a port number of 2400. |
|
Client Port Number |
The TCP socket point that the client connects to. |
|
Transfer Queue Size (msgs) |
The number of messages existing as buffers between engines in the event that the retransmitted message is lost. |
|
Max ReTransmit Request (ms) |
The maximum time between re-transmitting requests. |
|
Max Transmit Speed (msg/s) |
The system-wide limit on the speed at which a message is transmitted. |
|
Restore Defaults (button) |
This button restores all system default configuration. |
|
Encryption Enabled |
This enables encryption between the PubSub engines on each box within the system. |
|
New Encryption Key |
This button creates a new encryption key used by the PubSub engines on each box within the system. This key is not shown. |