Curveset Row Edit: Alarming tab
- Last UpdatedApr 24, 2025
- 2 minute read
Use the Alarming tab in the curveset Row Edit dialog box to configure the x- and y- coordinates of representative points on the surge control and surge warning lines.
|
Item |
Description |
|---|---|
|
Flow (X) (Surge Control) |
Enter the x-coordinate of a representative point on the surge control line. |
|
Flow Deadband (Surge Control) |
Enter the x-coordinate of a representative point on the surge control deadband line. The deadband line must be to the right of the surge control line. |
|
Pressure (Y) (Surge Control) |
Enter the y-coordinate of a representative point on the surge control line. |
|
Pressure Deadband (Surge Control) |
Enter the y-coordinate of a representative point on the surge control deadband line. The deadband line must be to the right of the surge control line. |
|
Slope |
Enter the slope of the surge control line. The same slope is used for the surge warning line. |
|
Flow (X) (Surge Warning) |
Enter the x-coordinate of a representative point on the surge warning line. |
|
Flow Deadband (Surge Warning) |
Enter the x-coordinate of a representative point on the surge warning deadband line. The deadband line must be to the right of the surge warning line. |
|
Pressure (Y) (Surge Warning) |
Enter the y-coordinate of a representative point on the surge warning line. |
|
Pressure Deadband (Surge Warning) |
Enter the y-coordinate of a representative point on the surge warning deadband line. The deadband line must be to the right of the surge warning line. |