Remote Row Edit: Inhibits tab
- Last UpdatedApr 24, 2025
- 1 minute read
Use the Inhibits tab in the remote Row Edit dialog box to inhibit events and alarms caused by state changes such as change of state from normal to off-normal and vice versa.
Normal and off-normal states for a remote are determined by the following:
-
No-reply timeouts
-
Security errors
-
Short messages
-
Illegal messages
Refer to the table below for field descriptions and instructions on how to configure the editable fields.
Items on the Inhibits Tab in the remote Row Edit Dialog Box
|
Items |
Description |
|---|---|
|
Off-Normal Alarm |
Select to inhibit off-normal alarming. The system will not generate an alarm when the point changes from a normal state to an off-normal state. |
|
Normal Alarm |
Select to inhibit normal alarming. The system will not generate an alarm when the point change from an off-normal state to a normal state. |
|
Off-Normal Log |
Select to inhibit off-normal logging. The system will not log an event when the point changes from a normal state to an off-normal state. |
|
Normal Log |
Select to inhibit normal logging. The system will not log an event when the point change from an off-normal state to a normal state. |
|
Switch Conn Path Alarm |
Select to inhibit the alarm that is generated when a communication line switches to a different path. |