FieldDrivenCondition Row Edit: Input Triggers tab

Enable Input

Select to enable the input point for monitoring by Tag Placement.

If not selected, the input point will not cause the automatic creation of a flex tag when it enters the trigger state.

Input Point

Enter or select the name of the status or multistate input point.

Trigger Value

For status and multistate points, either enter or select the name of the state that triggers the system to place the Flexible Tag Type on the associated outpoint point.

For analog points, enter the value that will be used with the comparison Operator to place the Flexible Tag Type on the associated output points.

Enter or select the name of the value that triggers the system to place the Flexible Tag Type on the associated outpoint point.

Note: For status and multistate points, the states available for each input point are based on the point's base message field.

Important: If you configure an Input Point, and then save without configuring a Trigger Value, the system automatically inserts the trigger state listed first in the select dialog box accessible through the Trigger Value field's (...) button. For analog points, the Trigger Value defaults to zero if you do not enter a value.

Operator

Select the comparison operator to use in evaluating the point’s current value field. Refer to the table below.

Flexible Tag Type

Enter or select the name of the flex tag type to place on the input point's associated output point.