Items on the Remote Communication Statistics Editor
- Last UpdatedJul 05, 2024
- 2 minute read
The following table lists all the column headings, fields and buttons on the Remote Communication Statistics Editor.
Items on the Remote Communication Statistics Editor
|
Field/Button |
Description |
|---|---|
|
Remote |
This field allows you to filter for the desired remote. |
|
Connection |
This field allows you to filter for the desired connection. |
|
Start Time |
Acting as a filter, this field allows you to specify the start time of the time interval shown in the Time column. |
|
End Time |
Acting as a filter, this field allows you to specify the end time of the time interval shown in the Time column. |
|
Search |
Select to display data values that are filtered according to the Remote, Connection, Start and End fields. |
|
Add |
Select to add a new record to the CommStats database. |
|
Time |
The time at which the data was recorded. |
|
Remote |
The name of the remote that is using the connection. |
|
Connection |
The name of the connection used by the remote. |
|
Success |
The number of successful communications for the defined time period. |
|
Failure |
The number of unsuccessful communications for the defined time period. |
|
Throughput |
The percentage of communications that were successful for the time period. |
|
No Reply |
The number of messages sent from the host that did not receive replies from the remote. |
|
Checksum |
The number of communications that failed because of a security error received at the host. |
|
Long Msg |
The number of messages received that were longer than expected. Expected length will vary depending on the protocol. |
|
Short Msg |
The number of messages received that were shorter than expected. Expected length will vary depending on the protocol. |
|
Wrong Remote |
The number of communications that failed because they were from the wrong remote. |
|
Offline |
The number of communications that failed because the remote was offline. |
|
SBO Relay |
The number of communications that were unsuccessful because the SBO (Select Before Operate) command failed at the relay stage. |
|
DB Error |
The number of communications that failed because there was a configuration error at the host. |
|
OffScan |
The number of communications that failed because the remote was off scan. |
|
Illegal Message |
The number of communications that failed because an illegal message was received from the remote (e.g., an invalid point address with a remote or an illegal protocol function code.) |
|
SBO Select |
The number of communications that were unsuccessful because the SBO (Select Before Operate) command failed at the selection stage. |
|
Line Fail |
The number of communications that were unsuccessful because the line failed. |