UnitConv Row Edit
- Last UpdatedJul 05, 2024
- 2 minute read
The unitConv Row Edit dialog box is used to configure a unitConv record. Here you specify source and destination units, along with the relevant conversion factors.
Refer to the table below for field descriptions and instructions on how to configure the editable fields.
|
Field |
Description |
|---|---|
|
Name |
Enter the name of the new record. Note: If you want to edit an existing record, select (...) and select the name of the unitConv record from the UnitConv Select dialog box. |
|
Description |
Enter a description of the record. The Description can be up to 47 characters in length. This field is for information purposes only and can be used to describe the record, its association with other points, or any other textual information. The Name and Description configured for a record appear in the summary tables in easy eXtended Operator Station (ezXOS). |
|
Source Unit |
Enter the name of the units to apply to the value. |
|
Destination Unit |
Enter the name of the alternate units into which the conversion equation will convert the current value of the analog or rate point. |
|
Conversion Factor A |
Enter the conversion factor representing FactorA in the following equation: AlternateUnitsForValue = FactorA * Value + FactorB |
|
Conversion Factor B |
Enter the conversion factor representing FactorB in the following equation: AlternateUnitsForValue = FactorA * Value + FactorB |