View points belonging to alarm bracket sets
- Last UpdatedApr 24, 2025
- 1 minute read
Follow this procedure to access a summary of points belonging to existing alarm bracket sets.
To view points belonging to alarm bracket sets
-
On the Alarm Bracket Set Control dialog box, select Show Brackets.
The Alarm Bracket Summary window opens.
The Alarm Bracket Summary window lists all points belonging to the selected alarm bracket set.
|
Item |
Description |
|---|---|
|
Name |
The name of the almbracket record. |
|
Description |
A brief description of the almbracket record |
|
Current Value |
The current value of the point indicated in the Source Path field. |
|
Reference Value |
The bracketed value of the reference point above and below which the Current Value of the reference point oscillates. |
|
High Dev. Limit |
AVEVA Enterprise SCADA generates an alarm if the Current Value of the reference point (Source Path) rises above this value. |
|
Low Dev. Limit |
AVEVA Enterprise SCADA generates an alarm if the Current Value of the reference point (Source Path) falls below this value. |
|
Source Path |
The path to the analog, rate, flowTotalConfig, or pipe_segment point whose current value becomes the reference value when bracketed. The application monitors the point's current value for deviations beyond the assigned limits. Note: The pipe_segment table allow Administrators to set alarm brackets on calculated gauge (hydraulic profile). |