Modify Ceiling Profile

In addition to being displayed by selecting Create Profiles on the Create Lattice Profile window, the Modify Profile window is accessed via the Main Ceiling Grid Tasks window (refer to Create Ceiling Grid).

On the Main Ceiling Grid Tasks window, if the Current Ceiling Grid owns any Lattice Profile elements then the Lattice Profile option under the Modify section on the window becomes active.

1. Selecting Modify > Lattice Profile displays the Modify Profile window with the grid control at the top of the window populated by all of the currently existing lattice profiles.

   

2. Right-clicking on a lattice profile in the Select Profile list display a pop-up menu.

   Delete Selected Profiles	Allows the user to delete one or more selected profiles.
   Locate in Tree	Changes the current CE in the Design Explorer to the selected profile.
   Locate from Tree	Highlights the profile to match the current CE in the Design Explorer. The current CE must be a valid element.

3. Picking a profile from the grid control populates the Profile Attributes section of the window with the attributes of the selected profile.

4. The user is now able to modify the Elevation, Start Position and End Position of the profile.

   Profile Attributes
   Elevation	Enter a new value for the elevation.
   Start Position
   Pick start position	Pick a new profile start position, if required.
   East	Enter a new value, if required.
   North	Enter a new value, if required.
   End Position
   Pick end position	Pick a new profile end position, if required.
   East	Enter a new value, if required.
   North	Enter a new value, if required.
   Accept Changes	Commits the changes to the database element.
   Discard Changes	Cancels any changes made on the window.
   Back to main grid tasks	Displays the Main Ceiling Grid Tasks window.
   Return to main tasks	Displays the Main Detailing Tasks window.

   Note: When modifying the position of the profile, it should be remembered that the End position is relative to the Start, so that a change to the Start position will also shift the End position. Also Elevation shifts the profile vertically, whilst maintaining its East and North positions.