LAMINATE_PLANE Statement
- Last UpdatedMay 17, 2023
- 1 minute read
The different ply have to be given in order toward the plate, as they are to describe doublings with tapering.
BEAD Statement
|
BEAD |
,<type_no> / NAME = '<name>' / TYPE = '<type>' /HEIGHT = <height> /TAP_HEIGHT = <height> /WIDTH = <width> /TAP_WIDTH = <width>; |
|
<type_no> |
An integer number in the interval 401-499 that identifies a specific bead. This number will be used to select the bead. |
|
NAME |
A name to identify the bead. This name will be used to select the bead. |
|
TYPE |
Where the bead is to be used. TRIANGLE – triangular bead at the side of the part. FILLET – connecting stiffener on a plate, FREE – applying the bead at free edge of plate like limit/notch/hole BUTT – connecting 2 plates along a seam. |
|
HEIGHT |
The height of the bead. If not given, the height is for BUTT, the thickness of the plate. Irrelevant for TRIANGLE. |
|
TAP_HEIGHT |
The additional height. Irrelevant for TRIANGLE. |
|
WIDTH |
The width of the bead. If not given, the width is for FREE, the thickness of the plate and for FILLET, the thickness of the stiffener. |
|
TAP_WIDTH |
The additional width. Irrelevant for TRIANGLE. |
|
TOT_AREA |
The total area of the bead. Used to be able to calculate WCOG together with the given quality for the bead. |