Move

Purpose:

To move existing panels to a new location.

Prerequisites:

One or more panels should be active in hull views on the current drawing. If there are no active panels, panel activation is prompted before moving can commence.

Instruction:

1. In the Planar menu, click Panel, then click Move.

   A form will appear, which requires a new location to be defined for the active panels.

2. Enter a new absolute location for the panels, or specify an incremental move along the X,Y or Z axis.

3. An incremental move is activated by the Relative position button on the location form. Incremental moves may be entered as a linear distance from the original position or as a number of Frame or Longitudinal positions. A positive number (for example, 10000 or +FR10) will move the panels forward on the X axis, towards port of the Y axis or up on the Z axis. A negative number (for example, -5000 or -LP10) will move the panels aft on the X axis, towards Starboard on the Y axis or down on the Z axis.

Options:

Not available.

Result:

Active panels will be moved to the new location. Schemes will be updated with new location information and references to hull curves, frames and longitudinal positions are updated to correspond to the new location.