Default Bracket Profile Position Number - 12​.1​.SP4*

Description

Default position numbers are calculated when Plane Panel Parts Generation is performed on brackets with profiles where position number is not explicitly defined. An unset position number is then set to the running number of the profile. If the profile is a stiffener the number of flanges on the bracket is added to the position number.

There has been felt a need to alternatively set the bracket profile part position number to the position number of the bracket. To give the user the opportunity to choose how to calculate unset bracket profile position numbers the logical name SBH_BRACKET_PROF_POSNO has been invented. It can take on one of the two values USE_BRACKET_POSNO and RUNNING_NO.

SBH_BRACKET_PROF_POSNO set to RUNNING_NO means that unset position numbers are calculated as running numbers. This setting is default.

SBH_BRACKET_PROF_POSNO set to USE_BRACKET_POSNO means that unset profile position numbers are replaced by the bracket position number.

The setting of SBH_BRACKET_PROF_POSNO has also impact when part names are determined before panel parts have been generated.

Benefits

Flexibility.

Compatibility Constraints

None.

For More Information

Refer to User Guide Hull Detailed Design / Manufacturing / Manufacturing of Plane Panel Parts / Plane Panel Parts / Set-up of Program / Environment Variables.

Affected Programs

AVEVA Hull Design.