View Pulldown Menu
- Last UpdatedJan 04, 2024
- 5 minute read
|
VIEW \ SET |
This gives four further options |
||
|
|
\BOW |
Assigns a section view to the selected window looking towards the bow. |
|
|
|
\STERN |
Assigns a section view to the selected window looking towards the stern. |
|
|
|
\KEEL |
Assigns a waterline view to the selected window looking towards the keel. |
|
|
|
\DECK |
Assigns a waterline view to the selected window looking towards the deck. |
|
|
|
\STARBOARD |
Assigns a buttock view to the selected window looking towards the starboard side |
|
|
|
\ISOMETRIC |
Assigns an isometric view to the selected window. |
|
|
\VIEW\DISPLAY ALL |
This gives seven further options |
||
|
|
\SECTIONS |
Displays all sections that are switched on, in the selected window. |
|
|
|
\BUTTOCKS |
Displays all Buttocks that are switched on, in the selected window. |
|
|
|
\WATERLINES |
Displays all Waterlines that are switched on, in the selected window. |
|
|
|
\CURVES |
Displays all switched on curves, in the selected window. |
|
|
|
\UNFITTED PATCHES |
Displays the boundaries of all patches that are switched on. |
|
|
|
\FITTED PATCHES |
Displays a surface mesh for all patches that are switched on. |
|
|
|
\END SURFACES |
Displays the generated end surfaces. |
|
|
|
VIEW CLEAR |
Clears all graphics from the selected window. |
|
|
|
VIEW REDRAW |
Refreshes the graphics in the selected window. |
|
|
|
VIEW\REDRAW ON |
Refreshes the graphics in the selected window, omitting curves which have been switched off. |
|
|
|
VIEW\WINDOW |
Windows in on an area of the selected view, using the cursor. |
|
|
VIEW\ZOOM |
This gives two further options |
||
|
|
\IN |
Zooms in, in the selected view, by halving the scale factor. |
|
|
|
\OUT |
Zooms out, in the selected view, by doubling the scale factor. |
|
|
VIEW\RESET |
This gives three further options |
||
|
|
\RESET |
Resets the selected view to its original size. |
|
|
|
\PREVIOUS WINDOW |
Sets the view dimension to the previous window. |
|
|
|
\NEXT WINDOW |
Sets the view dimension to the next window. |
|
|
|
VIEW\IDENTIFY |
Identifies a curve selected using the cursor. |
|
|
|
VIEW\IDENTIFY\RANGE |
Identifies all curves that intersect a line, the end points of which are digitized by the cursor. |
|
|
|
VIEW\IDENTIFY\PATCH |
Identifies a patch selected using the cursor. |
|
|
|
VIEW\SETTINGS |
Displays the View Settings dialog (see View Dialog for details). Used for the allocation of views to graphic display windows and the display of stored curves. |
|
|
VIEW\MULTIPLE DIALOGS |
Switch to allow dialogs to appear at the same time. |
||
|
VIEW\REFRESH |
Refresh all graphics views, tree views and curve lists. |
||
|
VIEW\STATUS BAR |
Used to switch on or off the status bar, if a tick mark is shown then the status bar will be switched on. |
||
|
VIEW\OUTPUT BAR |
Used to switch on or off the output bar, if a tick mark is shown then the output bar will be switched on. |
||
|
VIEW\CURVE BAR |
Used to switch on or off the curve bar, if a tick mark is shown then the curve bar will be switched on. |
||
|
VIEW\POINTS BUFFER |
Used to switch on or off the Points Buffer Window, if a tick mark is shown then the window will be switched on. |
||
|
VIEW\TOOLBAR |
This gives four further options |
This gives four further options |
|
|
\STANDARD |
Used to switch on or off the Standard toolbar. (A tick mark indicates the toolbar is switched on.) |
||
|
\VIEW |
Used to switch on or off the View toolbar. (A tick mark indicates the toolbar is switched on.) |
||
|
\DISPLAY |
Used to switch on or off the Display toolbar. (A tick mark indicates the toolbar is switched on.) |
||
|
\EDIT |
Used to switch on or off the Edit toolbar. (A tick mark indicates the toolbar is switched on.) |
||
|
\IDENTIFY |
Used to switch on or off the Identify toolbar. (A tick mark indicates the toolbar is switched on.) |
||
|
\CUSTOMIZE |
This will present the Customize dialog, allowing the user to customize existing toolbars or create new ones. |
