Bevel Type 40

This bevel type is a "K" bevel, that means, open in both directions with a nose. The bevel is symmetric, that means, the opening angles in both directions are equal and the nose is centered in the middle of the plate (in variant 0)

Figure 1:16. Bevel type 40

Relevant parameters: a, NOSE, GAP

If NOSE=N (0<N<1) then the nose height will be calculated as NOSE=N*E.

E is the e-measure of the joint as defined in 18.3.1

Figure 1:17. Variants of bevel type 40