Table Rules (@-values):
- Last UpdatedOct 25, 2023
- 2 minute read
|
@3041 |
Order number of profile on raw bar (from left to right) |
|
@3042 |
Left endcut bevel type on flange. |
|
@3043 |
Right endcut bevel type on flange. |
|
@3044 |
Left endcut bevel type on web. |
|
@3045 |
Right endcut bevel type on web. |
|
@3046 |
Left endcut described in the form. A:<value>B:<value>C:<value>R1:<value>R2:<value> Only possible parameters will be used. Furthermore, angles of 90 degrees, Radius, chamfer and amplitude equal to zero will be suppressed. |
|
@3047 |
Same as table 3046, but for right side. |
|
@3048 |
Excess value of left endcut. |
|
@3049 |
Excess value of right endcut. |
|
@3050 |
Total length of profile |
|
@3051 |
Marking text to be used on left end of profile. |
|
@3052 |
Marking text to be used on right end of profile. |
|
@3053 |
Name of profile as defined by the user via Part name Control. |
|
@3054 |
Left endcut type. |
|
@3055 |
Right endcut type. |
|
@3056 |
A-value of left endcut. |
|
@3057 |
B-value of left endcut |
|
@3058 |
C-value of left endcut. |
|
@3059 |
R1-value of left endcut. |
|
@3060 |
R2-value of left endcut. |
|
@3061 |
V1-value of left endcut. |
|
@3062 |
V2-value of left endcut. |
|
@3063 |
V3-value of left endcut. |
|
@3064 |
KS-value (Chamfer) of left endcut. |
|
@3065 |
A-value of right endcut. |
|
@3066 |
B-value of right endcut. |
|
@3067 |
C-value of right endcut. |
|
@3068 |
R1-value of right endcut. |
|
@3069 |
R2-value of right endcut. |
|
@3070 |
V1-value of right endcut. |
|
@3071 |
V2-value of right endcut. |
|
@3072 |
V3-value of right endcut. |
|
@3073 |
KS-value (Chamfer) of right endcut. |
|
@3074 |
Location of profile in ship (side). |
|
@3075 |
Left endcut bevel code on flange. |
|
@3076 |
Right endcut bevel code on flange. |
|
@3077 |
Left endcut bevel code on web. |
|
@3078 |
Right endcut bevel code on web. |
|
@3079 |
V4-value left. |
|
@3080 |
V4-value right. |
|
@3081 |
Amplitude of left endcut. |
|
@3082 |
Amplitude of right endcut. |
|
@3083 |
Profile name. |
|
@3084 |
Left endcut bevel type on second flange. |
|
@3085 |
Right endcut bevel type on second flange. |
|
@3086 |
Left endcut bevel code on second flange. |
|
@3087 |
Right endcut bevel code on second flange. |