Result for Cross Templates

The templates are written to the plate data bank (SB_PLDB). This includes all interior templates in the direction of the base plane v-axis and u-axis, edge templates and the base plane template.

The naming of the template objects will be <plate name>-<suffix> where suffix is an integer running number starting with 0. The base plane template will be named <plate name>-0 and the templates in the v-axis direction will be named <plate name>-1 through <plate name>-N where N is the number of templates in this direction. If there are edge templates at both ends of this direction, they are the first and last templates.

The first templates in the u-axis direction will be named starting with <plate name>-N+1.

A sketch showing the base plane (template) in its local uv-coordinate system with markings for all templates will be prepared by the program and stored in one of the drawing data banks. The sketch will also contain attachment angle information for edge templates. Names of cross bending templates are automatically generated. See also Hull Detailed Design / Manufacturing / Production Program Interface / Automatic Naming of Production Sketches. A separate list containing distances from the edges to all interior templates will also be store in a comma separated file on SB_SHIPPRINT with the extension .csv.

Below is an example of a sketch showing the base plane part in its local uv-coordinate system.

The corresponding csv file is then:

Aux. Axis,V1,U1

Distance From 0 axis,6410,6792

,JPE2P-6,JPE2P-5,JPE2P-4,JPE2P-3,JPE2P-2,JPE2P-1,Angle

U,0,1446,2249,3052,3855,4658,82

V,973,671,503,335,168,0,

,JPE2P-6,JPE2P-5,JPE2P-4,JPE2P-3,JPE2P-2,JPE2P-1,Angle

U,1751,3185,3988,4791,5594,6410,98

V,0,299,467,635,802,973,

,JPE2P-7,JPE2P-8,JPE2P-9,JPE2P-10,JPE2P-11,JPE2P-12,JPE2P-13,Angle

U,0,434,698,961,1225,1488,1751,58

V,973,2416,3291,4167,5042,5917,6792,

,JPE2P-7,JPE2P-8,JPE2P-9,JPE2P-10,JPE2P-11,JPE2P-12,JPE2P-13,Angle

U,1751,1433,1169,906,642,379,0,122

V,0,1059,1935,2810,3685,4560,5820,