General

Name

• Plate Name: Name of the shell plate.

• Add Position No.: Whether a position number should be added to the plate name.

• Add Symmetry Suffix: Whether a symmetry suffix should be added to the plate name.

• Auto Name: Check box will only be active if multiple plates have been defined. If this box is checked the system will allocate the number in the position number field (SB field if symmetry is SB, else PS field) to the first plate and then sequentially apply a new number to the other plates.

Posno

• PS: Position number for port side

• SB: Position number for starboard side

Material

• Mat./Pos. Side: Side to be considered the positive one when given values for thickness and laminate. If left blank, the positive side will be the one from which the seams are given in a clock-wise order.

• Create closed plate: If this box is checked, the plate is allowed to have two boundaries defined by the same seam interval. This is useful for creating a plate all the way around for example, a cylindrical surface.

• Symmetry: Plate Symmetry

• Inside: Plate thickness on the inside of the surface.

• Outside: Plate thickness on the outside side of the surface.

• Laminate Displacement: If set the moulded line will be at the outside of the laminate.

• Quality: Material Quality

• Laminate In: Laminate code on the inside.

• Laminate Out: Laminate code on the outside.

General

• Parts List: Identification string defined by the user. Optional.

• Surface Treatment: Identification string defined by the user. Optional.

• Destination: Identification string defined by the user. Optional.

• Raw Plate: Raw Plate Name. Optional.

• GPS 1-4: General Purpose Strings. Optional.