Create Floor Fittings

A Single Floor Fitting (PFIT) is a catalogue item which can be used to represent any type of geometric entity which is to be owned by, and positioned relative to, a floor.

1. From the design explorer or 3D graphical view, select the floor/screed where the fittings are to be positioned as the CE.

2. From the main menu toolbar select Create > Floor Fitting > Standard.

   The Floor Fittings window is displayed.

   

   Aid lines are displayed on the 3D graphical view to show the origin for the fitting.

   

The functionality available from the Floor Fittings window is identically to that available from Wall Fittings (for further information on Wall Fittings, see Create Wall Fittings) with these exceptions:

• Reference Datum.

Reference Datum

The reference datum allows you to specify the positioning of the fitting within the thickness of the floor/screed and the direction of fitting with respect to the floor/screed.

3. From the Positioning pane of the Floor Fittings window, select the reference datum from the available list.

   The location of the fitting on the floor is set by the input of the X Position and Y position. These two dimensions are measured from the origin of the owning wall indicated by the aid line in the graphic display.

4. Select Position fitting to display the Positioning Control toolbar.

   You are prompted to ‘Position Floor Fitting (Snap) Snap’ to position the fitting directly on the floor.

5. Click Apply to insert the floor fitting or click Dismiss to discard any information and close the Floor Fittings window.