Restriction File

A text string to represent "Centreline" on the sketches. The default is "CL".

Default and restriction parameters are defined by the user in an ASCII file assigned to the logical variable SBH_NSKETCH_RESTRICT. The file is keyword oriented and can be prepared using any available text editor. The possible keywords are listed below:

FORM_NAME=<Name of drawing form to be used>

Drawing form with drawing form rules as explained below. There is no default value for this keyword and it must be given if any of the other restrictions in this file shall be applied to the sketch. Example1: Nested Profile Sketch via Drawing Form of this document shows a sketch placed on a form and Example 2: Nested Profile Sketch withour Drawing Form shows the result when no drawing form is given by the user.

DISPLAY_RULER=YES/NO

If YES, then a ruler is displayed above the nested profile on the sketch. Default value is NO.

RULER_DIST=<Distance between nested profile and displayed ruler in mm's>

Default value of this distance is 15 mm.

TOP=<text>

A text string to represent "Top" on the sketches. The default is "TOP".

BOTTOM=<text>

A text string to represent "Bottom" on the sketches. The default is "BOTTOM".

AFT=<text>

A text string to represent "Aft" on the sketches. The default is "AFT".

FWD=<text>

A text string to represent "Forward" on the sketches. The default is "FWD".

PS=<text>

A text string to represent "Portside" on the sketches. The default is "PS".

SB=<text>

A text string to represent "Starboard side" on the sketches. The default is "SB".

CL=<text>

SHL=<text>

A text string to represent "Shell" on the sketches. The default is "SHL".