List File
- Last UpdatedDec 05, 2025
- 3 minute read
-
The resulting output basic data will be sorted with respect to the following concept in the order given below:
-
The identification number (see below). A new page will be printed for each new identification number.
-
The building block number. An empty line will be edited between unequal building block numbers. (Not valid when record type 10 has been given).
-
Type of profile of the bar. An empty line will be edited between unequal types.
-
The dimension of the profile. An empty line will be edited between unequal dimensions.
-
Increasing length.
The layout of the output list is explained below.
For an example, see Example.
|
row 4 |
<KVXYARD> |
<KVXLISTNAME> |
<lno> |
|
row 5 |
<KVXCSHIP><s> |
DATE:<date> |
PAGE <pno> |
|
row 7 |
<KVXHEAD1> |
||
|
row 8 |
<KVXHEAD2> |
||
|
row 10..n |
<data row> |
The rows 4 to 8 will be printed on the top of each new page.
|
<KVXYARD> |
Yard name. Max. 45 characters. Can be controlled via a logical name SB_YARD. |
|
<KVXLISTNAME> |
A fixed string, 'BASIC DATA FOR ORDERING OF BARS LISTNO'. |
|
<lno> |
An identification number of the list. The number is a combination of the building block number, the number of the panel in the block and a running number. |
Example:
Figure 1:1. Identification number via panel name.
The running number will start at 01 as soon as any of the digits in the identification concept changes.
|
<KVXCSHIP> |
A fixed string, 'SF500D SHIP:' |
|
<s> |
Ship letters, two characters. The characters will be fetched from the string defined by the logical name SB_HREF. If this is not defined, the letters will the initial letter/letters of the panel name. |
|
<date> |
Processing date. |
|
<pno> |
Page number. |
|
<KVXHEAD1> |
A fixed string, 'LOC TYPE PROF NO LENGTH TYPE A B S T EXCESS ENDCUTTYPE NOTES' |
|
<KVXHEAD2> |
A fixed string, 'NO NO NO LENGTH END1 END2' |
|
The columns denote: |
|
|
LOC TYPE |
The name of the panel object without the initial letter/letters. |
|
PANEL NAME |
The full panel name. |
|
PROF NO |
For longitudinals and transversals, the running number, otherwise the name of the attribute containing the information for a bar. |
|
NO |
Quantity. |
|
LENGTH |
The length of a bar including excess. Note that the excess is only the manufacturing excess. |
|
TYPE |
The profile type according to VIS standard. |
|
A,B,S,T |
The dimensions of the bar according to VIS-standard. The angle bar and the T-bar welded from two flat bars will be printed on the resulting list as two profiles 10 with 'L,' and 'T,' respectively in the concluding comment. The L-bar, VIS-standard code=33, welded from one L-bar and one flat bar will be printed on the resulting list as one profile 31 and one profile 10 with 'L,' in the concluding comment. |
|
EXCESS LENGTH |
The manufacturing excess for the length. The information may be missing. |
|
ENDCUTTYPE END1 END2 |
The end cut types for the bar according to the conventions in the HULL STANDARD. The information may be missing. |
|
NOTES |
For concluding comments. The program will use the column for the printing of the following information: |
|
L, |
L-bar made of flat bars. |
|
T, |
T-bar made of flat bars. |
|
BR,<no>, |
Profile on bracket <no>. |
|
H,<no>, |
Profile in hole <no>. |
|
L<no>, |
Profile belonging to longitudinal <no>. |
|
T<no>, |
Profile belonging to transversal <no>. |
|
FR<no>, |
Profile defined at frame position <no> (defined by TAG). |
|
LP<no>, |
Profile defined at longitudinal position <no> (defined by TAG). |
|
FB, |
Valid only for longitudinals and transversals. If the curvature of a bent profile exceeds the value given by:
where h is the amplitude and b is the arc length of an arbitrary circular arc of the profile trace, then it might be impossible to bend the profile, and the indication FB will be printed in the column. |
|
<name> |
The name of an object referred to by the panel object. |
Several of these indications may occur in the same line.