Apply Tiles in Grid

Once the grid layout has been created, the dimensions of the tiles to be placed in the layout grid need to be defined.

1. Use the HVAC Apply Tiles in Grid window to define tile dimensions.

2. From the main menu, select Utilities > HVAC Tiles/Grid Layout > Apply Tiles in Grid.

   

   You are required to input the tile dimensions to be positioned in the grid.

   East/West Tile Width	Input the width dimension of the tile in the east/west orientation (default is 600).
   North/South Tile Width	Input the width dimension of the tile in the North/South orientation (default is 600).
   OK	Select OK to close the window and create the tiles.
   Cancel	Select Cancel to close the window and complete the task.

   Note: The tiles do not have to be the same size as the grid squares, but usually are in practice.

3. You are prompted to Position the Tile Centre Point (2D Cursor).

4. Select and place the tiles in the layout grid, there is no need to be precise as the tile edges snap to the grid lines within half of a tile dimension in each direction.

5. Once all the tiles have been placed, press Esc to exit this utility.