Distance
- Last UpdatedDec 20, 2023
- 4 minute read
The user can drag an element in a specified direction and distance or move it in relation to a reference point (P-Point) or another element.
The distance is measured in the same direction as the direction of movement unless a Reference Plane option is selected.
The user must first select the element to be dragged in the design explorer or in the 3D graphical view. From the main menu, click Position > Drag, the Drag Move window with the Distance tab displayed.
Note: Axes are displayed in the 3D graphical view on the CE.
The Parameters pane gives the user the following options:
From the Origin drop-down menu select Origin or the P-Point that will be used as the reference point for the drag.
Enter the Distance; the value is used together with the selected Relative To option.
Enter the Direction of the drag move and an element in the WRT field that defines the frame of reference for the direction. The user can select WRT from the following options:
|
|
Select Current Element as WRT Element |
|
|
Select Current Element Owner as WRT Element |
|
|
Select World as WRT Element |
|
|
Pick WRT Element |
The Target pane gives the user the following options:
The Relative To option specifies how the element is positioned in relation to the target element or position:
|
No Target |
The origin of the CE has No Target options and the selected element moves the specified distance in the given direction. |
|
In Front |
The origin of the CE will be moved In front of the surface of the reference element. There must be a plan component in the direction. |
|
Behind |
The origin of the CE will be moved Behind the surface of the reference element. There must be a plan component in the direction. |
|
Ontop |
The origin of the CE will be moved Ontop the surface of the reference element. There must be an elevation component in the direction. |
|
Under |
The origin of the CE will be moved Under the surface of the reference element. There must be an elevation component in the direction. |
|
From |
The origin of the CE will be moved until it is the specified distance From the origin of the reference element. |
|
Towards |
The origin of the CE will be moved until it is the specified distance Towards the origin of the reference element. |
Select the Plane Through Target checkbox to allow the current element to be moved so that its origin moves a given distance in a given direction, where the distance is measured from the intersection of the direction of move and the reference Plane (the Plane text field becomes active when Plane Through Target checkbox is selected). The reference Plane is specified relative to a reference item. The Plane must not be parallel to the direction of movement.
The type of target item is specified by the Select option. The target can be a geometry element or a position. The following options are available:
|
Element |
Click on the Pick Target Element icon and pick a target element on the 3D view, to populate the Name field. |
|
Position |
Click on the Pick Target Position icon and pick a target position on the 3D view for graphical highlight of the selected position. |
|
Next |
Piping only, the user can move the CE origin, the distance (inputted into the window) towards the next element in the design explorer. Click Apply. |
|
Tail |
Piping only, the user can move the CE origin, the distance (inputted into the window) towards the tail of the branch in the design explorer. Click Apply. |
|
Previous |
Piping only, the user can move the CE origin the distance (inputted into the window) towards the previous element in the design explorer: Click Apply. |
|
Head |
Piping only, the user can move the CE origin, the distance (inputted into the window) towards the head of the branch in the design explorer. Click Apply. |
|
Current |
Piping only, the user can move the CE origin, the distance (inputted into the window) towards the currently identified element in the design explorer: Click Apply. |