Weld Handling

Spec.

Select the radio button to create a weld element from the current pipe spec. The weld thickness is pre-defined by the spec.

Config.

Select the radio button to create a weld element from a common weld spec. The weld thickness can be modified according to the design circumstance.

Zero Gap

The check box becomes active when you selects the Config. radio button.

Select the check box to define a weld thickness of 0.

Fabrication Type

According to Welding methods, you can select Manual, Machine, or Orbital, and can define Shop, Site, and Field.

Create Weld

Creates a weld for the selected pipe with specific options for Fitting to Fitting Connection and Slip-On Flanges. Refer to Weld Gaps for further information.

Create weld through Picking

Creates a weld by picking the specific element in the 3D graphical view.

Append Weld Number

Select the check box, the next available weld number is assigned to the current weld, by default.

Leave the check box unchecked for you to assign the weld number manually.

Note:
The weld number is a unique value. Duplicate weld numbers are highlighted by application.

Name

Name of the weld

Shop

Shows if the weld type is a Shop type

Type

Shows the type of the weld

Spool Limit

Shows if the weld is a Spool Limit weld or not.

Number

Displays the number of the weld

Modify the properties of the Weld set in the 3D graphical view (Shop, Type)

Refreshes the weld list.

Deletes all welds in the weld list, the following

By default the Include Spool Limits check box is selected, allowing you to Include Spool Limits within their deletion.

Note:
Should the weld list only contain Spool Limit Welds and the delete button be pressed, the toggle will automatically be set to true.

Deletes all the welds currently selected in the weld list, the following

By default the Include Spool Limits check box is selected, allowing you to Include Spool Limits within their deletion.

Should the weld list only contain Spool Limit Welds and the delete button be pressed, the toggle will automatically be set to true.

Navigate on 3D view

Select the check box to display the selected weld in the 3D graphical view.

Mark Weld Info

Select the check box to display the weld information for the selected element in the 3D graphical view.