Notch for Seam

<notch_for_seam>::=

      ,SEAM= <seam_no>, (1 ... 25)

      <S-ref> (1 ... 25)

      [SID= <direction>]

<seam_no>

Number of the seams for which notches should be made.

<S-ref>

Selects the stiffeners in the same panel in which the notches should be generated.

Note that if the stiffener is selected on a tag reference, several different stiffeners may be selected.

SID

Relevant only in cases when the stiffener is identified by a tag reference and stiffeners with the same tag exist on both sides of the panel.

The direction is specified either relative to the w-axis or as a main ship direction.

<direction>::= -1 | 1 |AFT|FOR|SB|PS|TOP|BOT

Note: that notches will be generated in all possible combinations of the given seams and stiffeners.