Modify Labels Graphically

This Section describes how to modify the geometry of a Label. Similar information is provided for Dimensions (see Modify Linear Dimensions Graphically and Modify Angular Dimensions Graphically) and 2D Geometry (see Edit 2D Primitives Graphically).

The Name label for Nozzle C1101-N6 is used in the illustrations and the feedback colour is cyan.

1. Select the Model Editor icon on the Drawing Display Window toolbar to select the required label.

   

2. Drag the label outline away from the equipment using the Model Editor.

   

   The Bend point at the mid-point of the leader line in now visible, as are the hotspots, which consist of:

   • The Rotation handle.

   • The Attachment point.

   • The Connection point.

3. Pick and drag the bend point to place a bend in the leader line.

   A second bend point will be created. This point can be moved as well, if required.

   Note: If you want re-select the label, then the label itself must be picked.

4. Move the attachment points and the connection points to create gaps and offsets.

   A dashed line will then appear between the arrow hotspot and the default position of the point. As an example, the illustration shows the connection hotspot dragged down and to the right.

   

5. When the leader line and label are positioned as required, save the arrangement by clicking on the background away from the label and leader line. The label and leader line are then shown in the pre-selected colour.