Examples of Cross Template Default Files

DISTTOEDGE, 100,

MAXDISTTOTEMPLATE, 1000,

MINHEIGHTOFTEMPLATE, 200,

MIN_TEMPLATES, 4,

This example default file will affect the result in the following way:

The distance to the first template is 100 mm if there is no edge template on that side. The number of templates in each direction is dependent on the fact that the distance between templates cannot exceed 1000 mm. The distance can actually be a lot less if a sufficient minimum number of templates are specified in the cross template dialog. If not, the minimum number is 4 in each direction. The distance between the base plane and the plate contour is at least 200 mm.