Please ensure Javascript is enabled for purposes of website accessibility
Powered by Zoomin Software. For more details please contactZoomin

Hull and Outfitting

TABLE OF CONTENTS

Nozzle Specification Form

Save PDF
Save selected topicSave selected topic and subtopicsSave all topics
Share
Share to emailCopy topic URL
  • Last UpdatedNov 24, 2025
  • 2 minute read

The Nozzle Specification form lets you build up a specification by reference to the attribute settings of existing nozzles in the catalogue database. The specification simply acts as an index to allow any required nozzle to be located easily.

Create a Nozzle Specification

  1. Select Create, then select Nozzle Spec from the main window drop-down.

    The Nozzle Specification form opens:

  2. Before you begin, you should have created at least one Specification World with its PURP attribute set to indicate its suitability for storing nozzle specifications. Set the purpose for NOZZLE spec to EQUI, and the SPEC purpose set to NOZZ.

    To build such a specification, navigate to a catalogue element (CATA, SECT or CATE) that contains all nozzles that are to be accessed via the new specification.

  3. The upper part of the form lets you specify details of the overall SPEC element to be created; the lower part lists all nozzles below the current level in the catalogue and lets you specify which ones are to be included in the specification.

  4. If required, change the default settings for Spec, Description and Standard.

  5. The Spec World option lists all available SPWL elements for the appropriate generic type (as controlled by the setting of the PURP attribute). If more than one is available, select the one below that the new SPEC element is to be created.

  6. The left-hand scrollable list shows the category (CATE) elements, while the right-hand list shows the nozzles in the selected category. By default, all listed nozzles will be incorporated into the specification. To prevent one or more nozzles or complete categories being included in the specification, select them in the relevant list and click the Remove option below that list. The 'removed' entries will only be shown (marked with a * symbol) if the Hidden option above the list is set to On. To reverse the process, select a 'removed' entry and click the Reinstate option.

  7. When the lists show only those nozzles which are to be selectable via the new specification, click OK to build the specification.

TitleResults for “How to create a CRG?”Also Available in