Modify Ceiling Hangers
- Last UpdatedJan 13, 2026
- 2 minute read
In addition to being displayed on selecting Create Hangers on the Create Hangers window, the Modify Hangers window is accessed from the Ceiling Support Tasks window.
-
On the main Ceiling Support Tasks window (refer to Ceiling Supports and Hangers), if the current Ceiling Grid owns any Hanger elements then selecting Modify > Hangers displays the Modify Hangers window with the Select Hanger List Control populated.
Note: From the Select Hanger pane, if the user wants to delete a Hanger, right click on a hanger and select Delete Selected Hanger.
The Modify Hangers window allows the user to select a particular Hanger from the List Control which populates the fields at the bottom of the window. The user can then make changes to the Hanger’s Name, Height and Distance.
|
Current Ceiling |
Shows the ceiling owned by the active element. A different ceiling can be selected from the drop-down list. |
|
Select Hanger |
Select a Hanger to modify from the list of Hangers owned by the ceiling. |
|
Name |
Enter a new name for the Hanger. |
|
Select Hanger Specification |
Displays the Choose Ceiling Hangers window. The user can select a hanger from the list and click Select. The user is returned back to the Modify Hangers window with the Specification field populated. |
|
Height |
When a specification is changed the Height value is re-displayed to the new specification value. The user can enter a new height value to enable them to build their own hanger. |
|
Distance |
Enter a new distance value which modifies the position of the Hanger relative to its distance along the profile it is attached to. |
|
Accept Changes |
Applies the selected modifications to the database. |
|
Discard Changes |
Cancels the selected modifications. |
|
Back to support tasks |
Displays the Ceiling Support Tasks window. |