Notch at Corner
- Last UpdatedDec 04, 2025
- 1 minute read
This sub-syntax is used to define notches at the corners of the panel.
(Corner number is the starting point of limit no i of the current panel.)
|
<notch_at_corner>::= , COR= <corner_no> (1 ... 25) [,LIM= <limit_no> (1 ... 25)] <corner_no>::= <limit_no>::= <integer> |
For unsymmetric notches, it is necessary to specify along which limit the unsymmetric notch should fall.
Example:
NOT, VUF200*75*50, COR=1, LIM=3;