Set-up of Program
- Last UpdatedDec 15, 2023
- 2 minute read
The name of the executable of this program is sf623d. It communicates via an input file and resulting files. The program is normally activated through the Job Launcher (JL) where the following set-up is required:
|
Name recognized by JL: |
Nesting 3-Axis |
|
AVEVA Marine logical |
JL Set-up and Explanation |
|
SB_INPUT1 |
Input file to be set-up with extension.dat in JL. |
|
SB_OUTPUT1 |
Output file with run-time information. To be set-up in JL as first output file with extension.log. |
|
SB_OUTPUT2 |
Output file with names of created nestings. |
|
SB_OUTPUT3 |
Output file with names of created nestings |
|
Name |
Description |
|
SB_PLDB |
Data bank containing developed plates |
|
SBH_3AX_SKETCHDB |
Data bank for storage of burning sketches and drawings with roll axis information. for further information about drawings stored in PADD data base see below. |
|
SB_DEFSTD |
Data bank containing drawing forms used for burning sketches and standard plates. |
|
SB_DEFNPL |
Data bank for storage of nested objects. |
|
SBH_3AX_RESTRICT |
File name of restriction file. |
|
SBB_USER_SIGNATURE |
Signature to be added to burning sketches. |
|
SBH_BURNER_DATA |
Burner data file. |
|
SBH_BURNER_ID |
Burner identification. |
|
SBH_HOOK_SELECTION |
Hook selection file for holes. |
3-axis nesting drawings are stored in the PADD data base pointed out by SBH_3AX_SKETCHDB and SBH_3AX_SKETCHDB_PADD. The logical name SBH_3AX_SKETCHDB should point to it self and for the SBH_3AX_SKECTDB_PADD pointing out where these drawings are stored in PADD. See the drafting documentation for setting up the department and registry field of SBH_3AX_SKETCHDB_PADD reference.
If the logical name SBH_3AX_SKETCHDB_PADD is not assigned the software will try to store the drawings in PADD where the standard drawings are stored (SB_PDB_PADD).
In addition, standard logical names such as SB_SHIPPRINT, SB_TAPE must be assigned. They are normally defined within a project and are not further dealt with here.