Input
- Last UpdatedNov 29, 2023
- 1 minute read
The program requires information about where to present the results (name of the output file) and which frames and longitudinals/seams/curves that shall be calculated. This information can be given in an input file, with name assigned to SB_INPUT1.
The input file should follow the following syntax:
|
OUTPUT,<String>; |
|
|
FRAME/FROM=<Int>/TO=<Int>/Step=<Int> |
(1-10 statements) |
|
SEAM/FROM=<Int>/TO=<Int>/Step=<Int>; |
(Max 10 statements) |
|
LONG/FROM=<Int>/TO=<Int>/Step=<Int>; |
(Max 10 statements) |
|
CURVE,<String>; |
(Max 100 statements) |
To produce a result, an OUTPUT statement must exist together with at least one FRAME statement and one of the statements SEAM, LONG or CURVE. The SEAM, LONG and CURVE statements can not be mixed.
The output string should contain the name of the resulting file. The file will be placed on the directory assigned to SB_SHIPPRINT if nothing else is specified.
|
Example: |
|---|
|
OUTPUT,'SF408D_TEST'; |
|
FRAME/FROM=50/TO=115/STEP=5; |
|
LONG/FROM=810/TO=890/STEP=10; |