The Setting for Drawings
- Last UpdatedNov 06, 2025
- 3 minute read
The Assembly Planning Deliverables form initially displays the Drawing options in a closed state, as shown here:
To open the facility click on the expand 
button. The form will now appear as shown in Figure 2:11 below.
Figure 2:11. The Drawing creation options
Key to the elements in the Drawing creation options:
|
A. |
Choose whether a drawing is to be generated when processing Assemblies. |
|
B. |
Choose the Type of Template used to create the drawing. The displayed sample (F) will change accordingly. |
|
C. |
Choose the paper size of drawing you require. |
|
D. |
Browse for PDF files. |
|
E. |
Whether to create PDF formatted files of each drawing when processing Assemblies. |
|
F. |
The operating system folder location of any PDF files. |
|
G. |
A sample of the selected Template used to create the drawing. |
|
H. |
Browse for a folder location for the PDF files. |
The Drawing settings can be modified as follows:
-
To produce a drawing at processing time, check the Create Drawing toggle.
.
-
If you do not require a drawing for the selected Assemblies, then uncheck the Create Drawing toggle
.
-
To base the generated drawing(s) on a different Type of Template, choose one from the Type drop-down options:
-
To change the paper size of the generated drawing(s), select one from the 'Size' drop-down options:
-
Choose whether you require a PDF formatted file for each generated drawing by either checking or unchecking the Output pdf option.
-
When producing PDF formatted files, you can choose the operating system folder in which they will be created. To search for a folder click on the
button to browse for a folder. The standard File Browser form will be displayed.