Listing of Manufacturing Curved Plates

Examples of listings are given in appendix Example of Bending Template Lists.

The heading of every page contains:

• The name of the yard.

• The program name.

• The running date and time.

• The page number.

• The name of the panel.

The listing consists of:

• Height of the jigs above the assembly plane.

• Position of the corners of the panel.

• Distance to the jig rows.

• Distance from the sight line.

• The angles between the assembly plane and the frame and waterline planes.

• Contour lengths along seams from a given boundary seam to the first jig row.

In cases where production information has been requested, also:

• Distances from reference lines between the corners of the panel.

• Angles between reference lines.

• Information about the lowest plate.

• Measures along seams for welding.

The different lists are explained below:

1. Height of the jigs above the assembly plane.

   The table lists, for every plate jig, the height of the two edges and to the centre of the cutout.

2. Position of the corners of the panel.

   The table lists the different panel corner numbers, the distances from the first jig row A, the distances from the sight line and the heights above the assembly plane.

3. Distance to the jig rows.

   The distances to the different jig rows, accumulated values with the first jig row as base, will be listed.

4. Distance from the sight line.

   Distances from the s8ight line to the marked side of the different jigs (= edge 1 of the jig).

5. The angles between the assembly plane and the frame and waterline planes.

   The angle between a frame plane and the assembly plane, as well as the angle between a waterline plane and the assembly plane, will be listed.

6. Contour lengths along seams from a given boundary seam to the first jig row.

   The table lists the distance along seams from a denoted seam to the first jig row. An explanation of the sign of the distance is given as well.