Create a Heat Exchanger - worked example

Create the two stacked exchangers, /XX9993 and /XX9994. These can be built using the standard equipment, the two standard equipments should be created without any supports.

1. Select "Standard" Heat Exchangers > "Horizontal" Shell and Tube Heat Exchangers > "Horizontal" Dished and Flanged ends > "EXCH 005" Dished and flanged with nozzles should be selected.

2. Use the dimensions on the drawing below to build these two Heat Exchangers.

   

3. Build one exchanger and then use copy function for the other.

4. The Nozzles should be rotated and the sizes checked.

5. Check that the Nozzle Names and specification have been changed to correspond with the Equipment Arrangement drawing shown below.

   Nozzle	Specification	Generic Type	Nominal Bore
   N1	Din Nozzles	PN16.RF	100
   N2	Din Nozzles	PN16.RF	150
   N3	Din Nozzles	PN16.RF	150
   N4	Din Nozzles	PN16.RF	100
   N5	Din Nozzles	PN16.RF	100
   N6	Din Nozzles	PN16.RF	150
   N7	Din Nozzles	PN16.RF	100
   N8	Din Nozzles	PN16.RF	150