Notes

BEV_REF_SYMB

Defining the symbol to be set the start of the reference line of a bevel note.

The values accepted by this keyword are:

ARROW a narrow arrow

NONE no reference symbol

(Default is ARROW)

BEV_SYMB_FONT

Defining the number of the symbol font containing symbols used in the bevel note.

(Default is 90)

BEV_SYMB_HEIGHT

Defining the height of the symbol space controlling the height of all symbols used in the bevel note.

(Default is 10 mm)

NO_BEV_TEXT

All texts will be suppressed for the bevel note.

CPLATE_COL=<colour>

Used to set colour on CPLATEs that are collected into a CPANEL.

Accepted values are:

The keywords to define the reference symbol for the posno notes are:

POS_LIN_SYMB = <value>

Defining the symbol to be set at the start of the reference line, when the identified part is represented in the view by a line, for example a stiffener or a bracket drawn as a symbolic line.

POS_SUR_SYMB = <value>

Ditto when a surface is identified, for example a plate or a bracket drawn in a planar view.

The values accepted by these two keywords are:

ARROW: A narrow arrow

BAR: A small line perpendicular to the reference line

DOT: A small circle

NONE: No reference symbol

The keywords to define the symbol surrounding the position number are:

POS_PRO_SYMB = <value>

This parameter defines the symbol for profiles.

POS_PLA_SYMB = <value>

Ditto for plates.

POS_BRA_SYMB = <value>

Ditto for brackets.

POS_CLI_SYMB = <value>

Ditto for clips.

The values accepted by these four keywords are:

CIRCLE

SQUARE

TRIANGLE

NONE

The keywords to define the additional information to be added after the position number are:

POS_PRO_TEXT = <value>

This parameter defines the information for profiles.

POS_PLA_TEXT = <value>

Ditto for plates.

POS_BRA_TEXT = <value>

Ditto for brackets.

POS_CLI_TEXT = <value>

Ditto for clips.

The values accepted by these four keywords are:

DIMENSION: Part dimensions

SYMBOL: Material symbol (effective only for profiles)

SYMB_O_DIM:Material symbol and dimensions (effective only for profiles)

NONE: No additional information.

The keywords to define the quality code to be added at the end of the posno note are:

POS_PRO_QUAL = <value>

Add quality code for profiles.

POS_PLA_QUAL = <value>

Ditto for plates.

POS_BRA_QUAL = <value>

Ditto for brackets.

POS_CLI_QUAL = <value>

Ditto for clips.

The values accepted by these four keywords are:

YES

The quality code will be added at the end of the note, preceded by a space, if the dimension string is presented, without the space otherwise.

NONE

Quality code will not be presented.

The system default setting for position number notes corresponds to the following set of keywords and values in a default file:

POS_LIN_SYMB = ARROW

POS_SUR_SYMB = DOT

POS_PRO_SYMB = TRIANGLE

POS_PLA_SYMB = CIRCLE

POS_BRA_SYMB = CIRCLE

POS_CLI_SYMB = CIRCLE

POS_PRO_TEXT = SYMB_O_DIM

POS_PLA_TEXT = DIMENSION

POS_BRA_TEXT = DIMENSION

POS_CLI_TEXT = DIMENSION

POS_PRO_QUAL = NONE

POS_PLA_QUAL = NONE

POS_BRA_QUAL = NONE

POS_CLI_QUAL = NONE