Removing a Part from an Already Published Hull Assembly

After transferring a hull assembly to AVEVA ERM, a part from it can be removed only after receiving an Acknowledgment notification from AVEVA ERM.

To remove a part from the hull assembly:

1. Open Assembly Planning in AVEVA Marine.

2. Select the assembly for which you want to remove a part.

3. Do one of the following:

   • If the assembly is not yet transferred to AVEVA ERM, select the part younwant to remove, right-click and select Remove. The part is removed from the assembly. For more information, see the documentation of AVEVA Marine.

   • If the assembly is already transferred to AVEVA ERM, go to Step 4 and complete the remaining procedure.

     Note: If the assembly is already published to AVEVA ERM, the publishing status for the assembly is 100 or 110.

4. Select the part you want to remove, right-click and select Remove. The message Are you sure you want to remove the selected part from its parent assembly? is displayed.

5. Click Yes. The message Remove Notification is displayed.

6. Click OK. An Update notification is sent to AVEVA ERM.

   Note: At the same time, the hull assembly is saved automatically in AVEVA Marine.

7. In AVEVA ERM, when the Update notification is processed for the FabricatePartListDelete ID, the part is removed from the assembly in the s21015 Fabricate Part Lists screen. If the part is removed successfully, an Acknowledgment notification is sent to AVEVA Marine. Else, an Error notification is sent.

   Note: After removing the part, if the hull assembly does not contain any other parts, both the part and its owner are removed from the screen in AVEVA ERM.

8. In AVEVA Marine, on the Notifications dialog box, process the Acknowledgment or Error notification.

   • In the case of an Acknowledgment notification, click Delete. The part is removed from the assembly.

   • In the case of Error notification, the part is not removed.