Set-up of Compensation Table
- Last UpdatedDec 03, 2025
- 1 minute read
The compensation table is defined using an ordinary text file in TIL format with statements as specified below:
COMPENSATION, <M1_value>/LENGTH=<length>/WIDTH=<width>;
CONSTANT,<constant_value>;
The COMPENSATION statement defines the M1 value for a certain length and width of a profile web (see the table below).
The trace of the web is recreated as passing through 5 points. These points are:
-
The original end points of the trace, moved the distance M1.
-
The midpoint of the trace (not moved)
-
Two additional points at a distance 1/4 of the total length from the ends. These two points are moved the distance CONSTANT * M1. Default value of CONSTANT is 0.25.
The table shown below illustrates the result of the set-up:
|
|
5000 |
6000 |
7000 |
8000 |
9000 |
..... |
|
350 |
M1=xx |
M1=xx |
M1=xx |
M1=xx |
M1=xx |
|
|
400 |
M1=xx |
M1=xx |
M1=xx |
M1=xx |
M1=xx |
|
|
420 |
M1=xx |
M1=xx |
M1=xx |
M1=xx |
M1=xx |
|
|
450 |
M1=xx |
M1=xx |
M1=xx |
M1=xx |
M1=xx |
|
|
500 |
M1=xx |
M1=xx |
M1=xx |
M1=xx |
M1=xx |
